Angel™ GT

 Designed for architectural installations where aesthetics are important.

• Aesthetic fixing for use with a wide range of Gripple hangers
• Ideal when lighting/services are exposed
• Available up to 45 kg SWL with 5:1 safety factor
• Two part construction for fast installation using M6 or Ø4.5 mm c/sunk screws
• Supplied as a ready-to-use kit with wire and a Gripple hanger

For fastening through profile roof cladding, light fittings and other cavities.

• Ideal when used as a Y-Fit to suspend lighting
• Available for use with No. 1, No. 2 and No. 3 hangers with up to 5:1 safety factor
• Comes as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)
• Independently certified
• Available in Stainless Steel

Specifically designed for fastening through roof cladding.

• Designed to fit 6 mm holes
• Suitable for every grade of steel
• Creates a secure hanger
• Safe working load may vary dependent on the thickness of the steel to which it is attached
• Available for use with No. 2 hanger only, with up to 5:1 safety factor
• Supplied as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)
• Independently certified

Quick and easy attachment for clips, brackets, light fittings and other existing structures.

• Ideal for services that require access or maintenance, such as cable tray and cable basket, especially when used as a Y-Fit
• Available for use with No. 1, No. 2 and No. 3 hangers with up to 5:1 safety factor
• Comes as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)
• Independently certified

Aesthetic fixing for use with any 6 mm or 8 mm threaded product.

• Available in M6 and M8 sizes
• Ideal for use on signage or where services are exposed, such as retail and office environments
• Available for use with No. 1, No. 2 and No. 3 hangers with up to 5:1 safety factor
• Supplied as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)
• Independently certified

For anchoring into concrete ceilings, metal decking and pressed metal.

• Supplied with Drop-in Anchors (as standard) or nuts as required
• M6, M8 and M10 versions available
• Available in sizes No. 1 - No. 4, with up to 5:1 safety factor
• Comes as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)
• Independently certified
• Available in Stainless Steel (M8)
• Fire rated version available

• Ideal for use where access to fixings is difficult due to insulation or
  fire protection
• Supplied with Drop-in Anchors (as standard) or nuts as required
• M6 and M8 versions available
• Available in sizes No.2 - No.3, with up to 5:1 safety factor
• Comes as a ready-to-use kit with wire rope and Gripple hanger
• Available in lengths from 1 m to 10 m (other lengths available upon request)