Fast Trak® - Low Profile

• Space saver – 21 mm bracket depth is even lower profile than standard Fast Trak range
• Quick – up to six times faster to install than traditional suspension systems
• Safe – pre-fabricated system which removes the need to cut threaded rod or channel on-site
• Tool free adjustment – bracket can be moved up and down the tracks to accommodate changes in position during installation
• Easy measurement – indicators at each end of the bracket offer measurement guide when marking fixing points on the ceiling; M4 level markers on the tracks highlight 50 mm increments, no leveling tools required
• Neat & tidy – system can be 'stacked' on-site to reduce storage requirements
• Zero waste – tracks bend neatly under bracket*
• Fire tested – to F120 to the temperatures associated with BS EN 1363-1:2020. Independent test data with load limits and exposure times is available upon request from Gripple Technical Services.

*Excess tracks can also be snapped off once bracket is levelled & secured for a neater finish. Bending tracks by hand is not recommended when excess is under 100 mm.

Please note, the below table shows load rating performance at ambient temperatures; for fire performance, please refer to the Gripple Fire Rated Product Matrix in the 'Downloads' section or email TechnicalServices@gripple.com.